Tank Alert® I

Indoor Tank Alarm

Tank Alert® alarms provide audio/visual warning of potential threatening liquid level conditions.

The Tank Alert® I indoor alarm system provides audio/visual warning of potential threatening liquid level conditions in lift pump chambers, sump pump basins, holding tanks, sewage, agricultural and other non-potable water applications.

If an alarm condition occurs, the horn sounds and alarm light activates. The horn can be turned off, but the alarm light remains on until the condition is remedied.

Tank Alert® I

Features:

NEMA 1 enclosure for indoor use
Red alarm light, green power on light, alarm test switch and horn silence switch
Alarm horn sounds at 86 decibels at 10 feet (3 meters)
Can be used with any UL Listed/Recognized switching mechanism rated to include 1 amp, 12 VAC load
Alarm system (when installed on separate circuit) operates even if the pump circuit fails
Switch mechanism operated on low voltage and is isolated from the power line to reduce the possibility of shock

Options:

Alternate float switch models for high or low level warning
120 VAC primary voltage or 230 VAC primary voltage (230 VAC model is not UL Listed or CSA Certified)

UL Listed, CSA Certified

Three-Year Limited Warranty

Tank Alert® I

Specifications

VOLTAGE FOR 120 VAC MODEL:
Primary: 120 VAC, 50/60 Hz, 5 watts max. (alarm condition)
Secondary: 12 VAC

VOLTAGE FOR 230 VAC MODEL:
Primary: 230 VAC, 50/60 Hz, 5 watts max. (alarm condition)
Secondary: 12 VAC

ALARM ENCLOSURE:
6 x 4 x 2.5 inches (15.24 x 10.16 x 6.35 cm), NEMA 1 metal

ALARM HORN:
86 decibles at 10 feet (3 meters)

POWER CORD:
6 feet (1.8 meters)

FLOAT SWITCH CONNECTION TERMINAL:
For float switch connection only. Do not apply power. (Voltage across terminals is 12 VAC. Maximum line impedance for initiating device: 5 ohms)

FLOAT SWITCH:
SJE SignalMaster® control switch with mounting clamp
Cable: 15 feet (4.57 meters), flexible 18 gauge, 2 conductor (UL) SJOW, water-resistant (CPE)
Float: 2.74 inches diameter x 4.83 inches long (7.0 cm x 12.3 cm), high impact, corrosion resistant polypropylene housing for use in sewage and water up to 140^oF (60^oC)

AUXILIARY ALARM CONTACTS (Optional):
(CSA Certified only unit)
Voltage: 120 VAC
Current: 5 amps maximum N/O; 3 amps maximum N/C

Available Downloads

Adobe Acrobat is a free download to view .pdfs

Visit our downloads section of this website for additional literature.