Tank Alert® ABW

Indoor Wireless Alarm with Auto Reset and Battery Backup

Tank Alert® alarms provide audio/visual warning of potential threatening liquid level conditions.

The Tank Alert® ABW (auto reset, battery backup, wireless) indoor alarm system provides audio/visual warning of potential threatening liquid level conditions in lift pump chambers, sump pump basins, holding tanks, sewage, agricultural, effluent filters and other water applications. It features a battery operated wirless transmitter that is placed in the tank up to 150 ft. away from the alarm.

When the high water alarm float switch activates, the transmitter sends a signal and sounds the indoor alarm, warning of a potentially threatening level condition. The horn can be silenced, but the alarm light remains on until the condition is remedied. Once the condition is cleared, the alarm will automatically reset.

Tank Alert® ABW

Alarm Features:

NEMA 1 enclosure for indoor use
Automatic alarm reset
Red alarm light, green power on light, alarm test switch and horn silence switch
6 ft. (1.8 meter) power cord
Alarm horn sounds at 87 decibels at 10 feet (3 meters)
If primary power fails, the alarm system continues to operate on the battery backup
Low battery chirp indicates when battery needs to be replaced (battery not included)
External terminal block for easy installation of float switch
Loss of signal alarm - after 24 hours without a signal, the red LED will begin flashing; after 7 days without a signal, the alarm will sound
Switch mechanism operated on low voltage and is isolated from the power line to reduce the possibility of shock

Transmitter Features:

Wireless transmitter with up to 150 ft. range
Meets all FCC requirements
Long-life lithium battery (recommended replacement 2 years)
Transmitter transmits once per hour or when the float position changes

Options:

Mounting bracket
Alternate float switch models and configurations
UL Listed component model available

Tank Alert® ABW

Specifications

VOLTAGE FOR 120V MODEL:
Primary: 120 VAC, 60 Hz, 2.4 watts max. (alarm condition)

BATTERY BACKUP POWER:
9 VDC

ALARM ENCLOSURE:
6 x 4 x 2.25 inches (15.24 x 10.16 x 5.71 cm), NEMA 1 plastic

ALARM HORN:
87 decibels at 10 feet (3 meters)

POWER CORD:
6 feet (1.8 meters)

FLOAT SWITCH CONNECTION TERMINAL (Optional):
For float switch connection only. Do not apply power. (Voltage across terminals is 8-9 VDC)

FCC ID #: SCP TAABW01
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

This device may not cause harmful interference.
This device must accept any interference received, including interference that may cause undesired operation.

Available Downloads

Adobe Acrobat is a free download to view .pdfs

Visit our downloads section of this website for additional literature.