Pump switches provide automatic pump control.
The Junior Super Single® pump switch is designed to directly control pumps up to 1/2 HP at 120 VAC and 1 HP at 230 VAC in non-potable water, water and sewage applications.
Although the Junior Super Single® pump switch is not sensitive to rotation, it is affected by turbulence and should be mounted in a non-turbulent location. It is not recommended for use with motor contactors or relays because the motor contactor or relay may experience chattering. A Super Single® or Double Float® pump switch would operate more efficiently in these installations.
UL Recognized, CSA Certified
Three Year Limited Warranty
Flexible 16 gauge, 2 conductor (UL, CSA) SJOW, water-resistant (CPE)
2.81 inches diameter x 3.42 inches long (7.14 x 8.68 cm) high impact, corrosion resistance, PVC housing for use in sewage and water up to 140oF (60oC)
Mercury-to-metal contacts, hermetically sealed in a steel capsule
120 VAC 50/60 Hz Single Phase:
Maximum Pump Running Current: 13 amps
Maximum Pump Starting Current: 40 amps
Recommended Pump HP: 1/2 HP or less
230 VAC 50/60 Hz Single Phase:
Maximum Pump Running Current: 8 amps
Maximum Pump Starting Current: 20 amps
Recommended Pump HP: 1 HP or less
NOTE: This switch must be used with pumps that provide integral thermal overload protection.
Adobe Acrobat is a free download to view .pdfs
Visit our downloads section of this website for additional literature.