


Pump switches provide automatic pump control.
The 20 amp rated SJE AmpMaster® pump switch is designed to directly control grinder and high head sewage pumps up to 1 1/2 HP at 125 VAC and 3 HP at 250 VAC in grinder and lift station applications, as well as septic tank effluent pump (STEP) systems.
The SJE AmpMaster® pump switch is not sensitive to rotation or turbulence, allowing it to be used in both calm and turbulent applications. It is available for pump down applications only.
Features:
.jpg)
Options:
UL Recognized, CSA Certified
Three Year Limited Warranty
Specifications:
CABLE:
Flexible 12 gauge, 2 conductor (UL, CSA) SJOW, water-resistant (CPE)
FLOAT:
3.05 inches diameter x 3.56 inches long (7.75 x 9.04 cm) high impact, corrosion resistance, PVC housing for use in sewage and water up to 120oF (50oC)
ELECTRICAL:
125 VAC 50/60 Hz Single Phase:
Maximum Pump Running Current: 20 amps
Maximum Pump Starting Current: 120 amps
Recommended Pump HP: 1 1/2 HP or less
250 VAC 50/60 Hz Single Phase:
Maximum Pump Running Current: 20 amps
Maximum Pump Starting Current: 120 amps
Recommended Pump HP: 3 HP or less
NOTE: This switch must be used with pumps that provide integral thermal overload protection. Certain pump applications may require the use of an external capacitor start kit.
Adobe Acrobat is a free download to view .pdfs
Visit our downloads section of this website for additional literature.