SJE-Rhombus SES Controls Float Switches
- SJE PumpMaster®
- SJE PumpMaster® Plus
- SJE PumpMaster® SPDT
- Double Float® Master
- SJE AmpMaster®
- SJE VerticalMaster®
- SJE MicroMaster® AC/DC
- SJE MicroMaster® Plus WS
- Junior Super Single®
- Super Single®
- Double Float®
- SJE SignalMaster®
- SJE SignalMaster® SPDT
- SJE MilliAmpMaster™
- Sensor Float®
- Sensor Float® Mini
- Product Info
- Features
- Specs
- Downloads
Junior Super Single®
Mercury-Activated, Wide-Angle Pump Switch
Pump switches provide automatic pump control.
The Junior Super Single® pump switch is designed to directly control pumps up to 1/2 HP at 120 VAC and 1 HP at 230 VAC in non-potable water, water and sewage applications.
Although the Junior Super Single® pump switch is not sensitive to rotation, it is affected by turbulence and should be mounted in a non-turbulent location. It is not recommended for use with motor contactors or relays because the motor contactor or relay may experience chattering. A Super Single® or Double Float® pump switch would operate more efficiently in these installations.
Junior Super Single®
Features:
- Controls pumps up to 1/2 HP at 120 VAC and 1 HP at 230 VAC
- Adjustable pumping range of 6.5 - 19 inches (16.5 - 48 cm)
- Includes standard mounting clamp and boxed packaging
Options:
- For pump up or pump down applications as specified by part number
- With a 120 VAC or 230 VAC piggy-back plug
- Without a plug for direct wiring in 120 VAC or 230 VAC applications
- In standard cable lengths of 10, 15, 20, or 30 feet (3, 5, 6, or 10 meters) - longer lengths available
UL Recognized, CSA Certified
Three Year Limited Warranty
Junior Super Single®
Specifications:
CABLE:
Flexible 16 gauge, 2 conductor (UL, CSA) SJOW, water-resistant (CPE)
FLOAT:
2.81 inches diameter x 3.42 inches long (7.14 x 8.68 cm) high impact, corrosion resistance, PVC housing for use in sewage and water up to 140oF (60oC)
MERCURY SWITCH:
Mercury-to-metal contacts, hermetically sealed in a steel capsule
ELECTRICAL:
120 VAC 50/60 Hz Single Phase:
Maximum Pump Running Current: 13 amps
Maximum Pump Starting Current: 40 amps
Recommended Pump HP: 1/2 HP or less
230 VAC 50/60 Hz Single Phase:
Maximum Pump Running Current: 8 amps
Maximum Pump Starting Current: 20 amps
Recommended Pump HP: 1 HP or less
NOTE: This switch must be used with pumps that provide integral thermal overload protection.
Available Downloads
- Catalog Page with Pricing
- Installation Instructions
- Does Your State Restrict Mercury Products?
- Select Models Available for Quick Ship
- We're Proud to Offer a Three-Year Limited Warranty
Adobe Acrobat is a free download to view .pdfs
Visit our downloads section of this website for additional literature.
