SJE PumpMaster®

Mechanically-Activated, Wide-Angle Pump Switch

Pump switches provide automatic pump control.

The SJE PumpMaster® pump switch is designed to directly control pumps up to 1/2 HP at 120 VAC and 1 HP at 230 VAC in potable water, water and sewage applications.

The SJE PumpMaster® pump switch is not sensitive to rotation or turbulence, allowing it to be used in both calm and turbulent applications.

SJE PumpMaster®

Features:

Passed NSF Standard 61 protocol by an approved Water Quality Association laboratory
Heavy-duty contacts
Controls pumps up to 1/2 HP at 120 VAC and 1 HP at 230 VAC
Adjustable pumping range of 7 - 36 inches (18 -91 cm)
Includes standard mounting clamp and boxed packaging

SJE PumpMaster® pump switch on/off position diagram

Options:

For pump up or pump down applications as specified by part number
With a 120 VAC or 230 VAC piggy-back plug
Without a plug for direct wiring in 120 VAC or 230 VAC applications
In standard cable lengths of 10, 15, 20, or 30 feet (3, 5, 6, or 10 meters) - longer lengths available

UL Recognized, CSA Certified

Three Year Limited Warranty

SJE PumpMaster®

Specifications:

CABLE:
Flexible 16 gauge, 2 conductor (UL, CSA) SJOW, water-resistant (CPE)

FLOAT:
3.05 inches diameter x 3.56 inches long (7.75 x 9.04 cm) high impact, corrosion resistance, PVC housing for use in sewage and water up to 140^oF (60^oC)

ELECTRICAL:
120 VAC 50/60 Hz Single Phase:
Maximum Pump Running Current: 13 amps
Maximum Pump Starting Current: 85 amps
Recommended Pump HP: 1/2 HP or less

230 VAC 50/60 Hz Single Phase:
Maximum Pump Running Current: 13 amps
Maximum Pump Starting Current: 85 amps
Recommended Pump HP: 1 HP or less

NOTE: This switch must be used with pumps that provide integral thermal overload protection.

Available Downloads

Adobe Acrobat is a free download to view .pdfs

Visit our downloads section of this website for additional literature.