SJE-Rhombus

SJE-Rhombus International Product Details

  • Product Info
  • en Español
  • Features
  • Specs
  • Downloads

EZconnex® 4-port Float Switch Connection System

Manifold/Float Switch Connection System

The EZconnex® 4-port float connection system is a revolutionary new way to install float switches in a wet well for level control applications.


Installation is as easy as 1, 2, 3, 4...Simply install the manifold, plug in the floats, and wire the manifold cable to the control panel. The color-coded cable makes for a quick, clean installation!  The quick release float switch connections allow for easy maintenance and replacement of floats, saving installers time and money.


The EZconnex® system includes: manifold and mounting bracket with hardware. Ordered separately: sealing plug with rubber boot and EZconnex® or KwikSwitch™ low current float switch. Alternative float options and 3-port EZconnex® available to meet your needs.

 

EZconnex® Sistema de Conexión de 4-puertos (Flotadores)

Manifold/Sistema de Conexión de Flotadores

El sistema de conexión EZconnex® de 4 puertos (flotadores) es una nueva y revolucionaria manera de instalar interruptores de flotador en pozos/tanques de agua para aplicaciones de control de nivel.

La instalación es tan fácil como 1, 2, 3 ... Simplemente instale el manifold, conecte los flotadores y el cable del manifold al panel de control. ¡El cable con código de colores hace que la instalación sea rápida y limpia! Las conexiones de liberación rápida para interruptores de flotador permiten el fácil mantenimiento y sustitución de los flotadores, ahorrando tiempo y dinero a los instaladores.

El sistema EZconnex® incluye: manifold y soporte de montaje con accesorios.
Ordenar por separado: tapón de cierre con bota de goma e interruptores de flotador de baja corriente EZconnex® o KwikSwitch™.
También disponible en versión de 3-puertos (flotadores) para satisfacer sus necesidades.

 

 

 

EZconnex® 4-port Float Switch Connection System

Features:

  • Includes mounting bracket and hardware
  • Rated for short term water submersion
  • Designed for use with EZconnex® or KwikSwitch™ float switches  (not included with manifold; float switches must be ordered separately):      
    • Low current applications down to 0.160mA at 125V
    • Mechanically-activated, snap action contacts
    • Manifold housing includes colored caps that match Red-Blue-Yellow-White wire pairs in manifold cable for easy field wiring and identification
    • Activation angle above/below horizontal: 10.16 cm (4”) wide-angle; 3.81 cm (1.5”) narrow-angle

Options:

MANIFOLD:

  • Standard cable lengths of 7.62, 15.24, or 30.48 m (25, 50, or 100 ft)
  • Sealing plug (includes rubber boot) required for unused port(s)

FLOAT SWITCH:

  • Standard cable lengths of 1.52, 3.05, 6.10 m (5, 10, or 20 ft)
  • Blue cap for normally open (high level) applications or red cap for normally closed (low level) applications
  • With narrow or wide-angle pumping ranges
  • Standard mounting clamp for applications where the switch can be attached to a discharge pipe or similar mounting device

CSA Certified

US Pat. 9,559,455 and 9,583,867. Foreign Patents Pending.

Five-Year Limited Warranty

 

 

EZconnex® 4-port Float Switch Connection System

Specifications:

MANIFOLD:

Cable: Direct Burial Shielded PVC Type TC-ER TFFN (UL) 600V 18 gauge, 6-conductor

Housing: ABS Plastic

ELECTRICAL:

125 VAC: Max. Electrical Load: 1 amp per connection port

 

FLOAT SWITCH:

Cable: flexible 18 gauge, 2-conductor (UL, CSA) SJOW, water-resistant (CPE)

Float: 7.0 diameter x 12.3 cm long (2.74 x 4.83”), high-impact, corrosion resistant, polypropylene housing for use in sewage and water up to 60oC (140oF)

Max. Water Depth: 9 m (30 ft), 90 kPa (13 PSI)

ELECTRICAL:

125 VAC: Max. Electrical Load: 1 amp, Min. Electrical Load: 0.160 mA

30 VDC: Max. Electrical Load: 1 amp, Min. Electrical Load: 0.160 mA

5 VDC: Min. Electrical Load: 1 mA

USA  French Canadian  Chinese

French  German  Italian  Spanish