Sensor Float® Mini

Mercury-Activated, Narrow-Angle Control Switch

Control switches accurately monitor liquid levels to activate pump control panels and alarms.

The Sensor Float® Mini control switch is used to accurately monitor high (normally open) or low (normally closed) liquid levels to activate pump control panels and alarms in confined sewage and non-potable water applications.

Normally Open Models (high level): The control switch turns on (closes) when the float tips slightly above horizontal signaling a high level and turns off (opens) when the float drops slightly below horizontal. 

Normally Closed Models (low levels): The control switch turns on (closes) when the float tips slightly below horizontal signaling a low level and turns off (opens) when the float tips slightly above horizontal. 

This switch is not sensitive to rotation.  Contact SJE-Rhombus regarding  intrinsically safe applications.

 

Sensor Float® Mini

Features:

• Designed for use in confined spaces
  
• Control differential of 1 cm (.5 inches) above or below horizontal

Options:

• For normally open (high level) or normally closed (low level) applications
• In standard cable lengths of 3, 5, 6, or 10 meters (10, 15, 20, or 30 feet) - longer lengths available
  
• Two mounting options for flexibility in installation:
  Mounting Clamp: for applications where the float can be attached to a discharge pipe or similar mounting device
  Externally Weighted: for applications where the float can be suspended from above
  

UL Listed, CSA Certified

Three Year Limited Warranty

 

 

Sensor Float® Mini

Specifications:

CABLE:
Flexible 18 gauge, 2 conductor (UL, CSA) SJOW, water-resistant (CPE) jacket

FLOAT:
7.14 cm diameter x 8.68 cm long (2.81 inches diameter x  3.42 inches long) high impact, corrosion resistance, PVC housing for use in sewage and non-potable water up to 60^oC (140^oF)

MAXIMUM WATER DEPTH:
9 meters (30 feet), 90 kPa (13 PSI)

MERCURY TILT SWITCH:
Single pole, single throw, mercury-to-metal contacts, hermetically sealed in a steel capsule and epoxy sealed in the float housing

ELECTRICAL:
5 amps, 120/230 VAC, 50/60 Hz

NOTE: This switch is not recommended for controlling electrical loads less than 30 milliamps, 12 VAC and non-arcing electrical loads (intrinsically safe applications).

 

Available Downloads

• Catalog Page
• Request a Quote
• We're Proud to Offer a Three-Year Limited Warranty

Adobe Acrobat is a free download to view .pdfs

Visit our downloads section of this website for additional literature.