SJE-Rhombus International Product Details

  • Product Info
  • en Español
  • Features
  • Specs
  • Downloads

EZconnex® 3-port Float Switch Connection System

Manifold/Float Connection System

The EZconnex® 3-port float connection system is a revolutionary new way to install float switches in a wet well for level control applications.

Installation is as easy as 1, 2, 3...Simply install the manifold, plug in the floats, and wire the manifold cable to the control panel. The color-coded cable makes for a quick, clean installation!  The quick release float switch connections allow for easy maintenance and replacement of floats, saving installers time and money.

The EZconnex® system includes: manifold and mounting bracket with hardware. Ordered separately: sealing plug with rubber boot and EZconnex® low current float switch.

Sistema de Conexión de Flotadores EZconnex®

Manifold / Sistema de Conexión de Flotadores

El sistema de conexión de flotadores EZconnex® es una revolucionaria y nueva forma de instalar interruptores de flotador en pozos/tanques de agua para aplicaciones de control de nivel.

La instalación es tan fácil como 1, 2, 3 ... Simplemente instale el manifold, conectar los flotadores y el cable del manifold al panel de control. ¡El cable con código de colores facilita una instalación rápida y limpia! Las conexiones del interruptor de flotador de liberación rápida permiten el fácil mantenimiento y sustitución de los flotadores, ahorrando tiempo y dinero a los instaladores.

El sistema EZconnex® incluye: manifold y soporte de montaje con accesorios. Pedir por separado: (tapón de cierre con bota de goma y interruptores de flotador de baja corriente EZconnex®.



EZconnex® 3-port Float Switch Connection System


  • Includes mounting bracket and hardware
  • Rated for short term water submersion
  • Designed for use with EZconnex® float switches (not included with manifold; float switches must be ordered separately):      
    • Low current applications down to 0.160mA at 125V
    • Mechanically-activated, snap action contacts
    • Colored caps for easy identification of normally open (blue cap) or normally closed (red cap) models
    • Activation angle above/below horizontal:10.16 cm (4”) wide-angle; 3.81 cm (1.5”) narrow-angle



  • Standard cable lengths of 7.62, 15.24, or 30.48 m (25, 50, or 100 ft)
  • Sealing plug (includes rubber boot) required for unused port(s)


  • Standard cable lengths of 1.52, 3.05, 6.10 m (5, 10, or 20 ft)
  • Blue cap for normally open (high level) applications or red cap for normally closed (low level) applications
  • With narrow or wide-angle pumping ranges
  • Standard mounting clamp for applications where the switch can be attached to a discharge pipe or similar mounting device

CSA Certified

US Pat. 9,559,455 and 9,583,867. Foreign Patents Pending.

Five-Year Limited Warranty



EZconnex® 3-port Float Switch Connection System



Cable: Direct Burial Shielded PVC Type TC-ER TFFN (UL) 600V 18 gauge, 6-conductor

Housing: ABS Plastic


125 VAC: Max. Electrical Load: 1 amp per connection port



Cable: flexible 18 gauge, 2-conductor (UL, CSA) SJOW, water-resistant (CPE)

Float: 7.0 diameter x 12.3 cm long (2.74 x 4.83”), high-impact, corrosion resistant, polypropylene housing for use in sewage and water up to 60oC (140oF)

Max. Water Depth: 9 m (30 ft), 90 kPa (13 PSI)


125 VAC: Max. Electrical Load: 1 amp, Min. Electrical Load: 0.160 mA

30 VDC: Max. Electrical Load: 1 amp, Min. Electrical Load: 0.160 mA

5 VDC: Min. Electrical Load: 1 mA


USA  French Canadian  Chinese

French  German  Italian  Spanish